Furnace, Induction furnace, Induction melting furnace, Furnace manufacturer

	Magnalenz Induction Furnace
	Description Of Mf Installations
	Melting Crucibles
	Mf Solid State Power Converter
	Ancillary Equipments
	Control Circuits
	Safety Margin In Power Semiconductors
	Safety And Protection System
	Furnace
	Aluminum Melting
	Induction Melting Of Brass
	Induction Melting Of Copper
	Induction Melting Of Steel
	Very Small Capacity Induction Melting Furnace
	Press Report

Safety And Protection System

Advance parallel Inverter circuit design, result of years of experience, enable us to present one of the Safest Induction Furnaces.

Protection Features Are:

Over voltage protection at mains.
Over current protection for Thyristor & Capacitors.
Phase Protection at input.
Over Voltage protection for Thyristor & Capacitors.
On all main water cooling branches, temperature and water Flow are controlled.
Earth Leakage detector.
Air Temp in side panel for Protection.

The Magnalenz Difference

MAGNALENZ is the best induction furnace producer to provide after sales maintenance and service because of:

Magnalenz high technology design means less failure
Has a special system that locate the faults
Suitable design for fast technical aid
Built with care & quality workmanship means less failure
Testing facility
Clean layout ample space easy accessibility to all components means fast & quality maintenance servicing
Stock of Spare parts

Key Features:

Flexibility in Selection of Frequency to suit the stirring.
Power factor in the range of 0.95 to 0.98.
Short circuit proof current source inverter.
Highest efficiency 97%.
Liberally rated components provide extra safety margin to suit diverse operating conditions.
12 Pulse system for low harmonic contents (above 1500KW).
Ability to melt different metals.
Can be operated on DG Sets.
Full power from start to end.
Built-in test diagnostics.
Instant start and stop.
Operates under voltage fluctuation.
No inefficient load-matching transformer.
Highly efficient and rugged design.
Flow switches/temperature sensors for protection against water flow failure/Temp. rise.
Earth leakage protection for operator safety.
Simple design facilitates preventive maintenance.
Continuous operation.
Capacity: 25KW to 10000KW
Frequency 150Hz to 1000Hz

Magnalenz Induction Furnace for Metals

Cast Iron / Steel
Type	Capacity (K.G.)	Power (KW)	Melting Rate Kgs/hr
			Cast Iron 1450 C	Steel 1600 C
FER 01	100	75	110	100
FER 02	100	100	150	130
FER 03	200	150	240	210
FER 04	300	250	430	380
FER 05	500	300	510	460
FER 075	750	450	800	700
FER 1	1000	750	1410	1200
FER 1.5	1500	1000	1880	1690
FER 2	2000	1200	2350	2040
FER 3	3000	1500	2880	2450
FER 5	5000	2000	3840	3220
FER 7	7000	3000	5760	4910
FER 10	10000	4000	7690	6550

Magnalenz Induction Melting Furnaces

Factory/Plant Address
B/4Sakariba Estate, G.I.D.C. Phase - IV,
Vatva, Ahmedabad - 382445 Gujarat (INDIA)
Phone No. : +91-79-25841065 / 30917163 / 55120554
Telefax :+91 - 79 - 25841065

Web Site: http://www.magnalenzindia.com/
E-mail:contact@magnalenz.com






1. Lowest Melting Cost, cause of highest electrical efficiency so consumes less KWH/TON of melting 2. Lowest Auxillaries Running Cost, cause of Highest thermal efficiency so melting cost in totality is reduced 3. Lowest input KVA required, cause of the best average power factor of the furnace is 0.98 to 0.99 in actual running conditions, so better utilization of Power unit 4. Reduced fixed cost/ variable cost, cause of excellent lining life at lowest power consumption, so an over all better utilizations of productive hours increase due to less patching & sintering. 5. Excellent Reliability, cause of structured and simples design of the furnace reduces the break-down. 6. Lowest investment cost, (A) Cause of Compact furnace design, covers less floor space area compare to others. (B) Cause of reasonable furnace price

HOME l PROFILE l PRODUCTS l SITEMAP l E-MAIL l CONTACT