 |
 |
| MF Solid State Power Converter | |||||
| Converts the line/mains frequency in to medium frequency required for efficient operation. |  |
||||
| Basically it Consists of: | |||||
|
|||||
MF Power Factor Compensation Capacitor Bank |
|||||
A set of water-cooled medium frequency capacitors connected by Electrolytic grade copper busbars, to avoid losses, due to high currents. It is fitted inside panel or outside, specially protected frames, automatically compensates the low power factor to the Furnace. |
|||||
|
|||||
|
|
 |
|
1. Lowest Melting Cost, cause of highest electrical efficiency so consumes less KWH/TON of melting 2. Lowest Auxillaries Running Cost, cause of Highest thermal efficiency so melting cost in totality is reduced 3. Lowest input KVA required, cause of the best average power factor of the furnace is 0.98 to 0.99 in actual running conditions, so better utilization of Power unit 4. Reduced fixed cost/ variable cost, cause of excellent lining life at lowest power consumption, so an over all better utilizations of productive hours increase due to less patching & sintering. 5. Excellent Reliability, cause of structured and simples design of the furnace reduces the break-down. 6. Lowest investment cost, (A) Cause of Compact furnace design, covers less floor space area compare to others. (B) Cause of reasonable furnace price |
|