Magnalenz Induction Furnace
 Description Of Mf Installations

 Melting Crucibles
 Mf Solid State Power Converter
 Ancillary Equipments
 Control Circuits
 Safety Margin In Power Semiconductors
 Safety And Protection System
 Furnace

 Aluminum Melting

 Induction Melting  Of Brass

 Induction Melting  Of Copper

 Induction Melting  Of Steel

 Very Small Capacity  Induction Melting Furnace
   Press Report
  Briquetting Machine
   Very Small Capacity  Induction Melting Furnace
   
 
 

 
 
VERY SMALL CAPACITY INDUCTION MELTING FURNACE

AVAILABLE CAPACITY:
IN KGS:

 250 GMS TO 5 KGS

IN KW:

2 KW TO 5 KW

UNIT CONSUMPTION IN MANGALENZ INDUCTION MELTING FURNACE @NORMAL CONDITIONS:
*IN ACTUAL RUNING CONDITION:

 

BASICALLY SUITABLE FOR PERCIOUS METAL MELTING, TESTING, R & D PURPOSE

POURING TEMP FOR STEEL :

1500C TO 1600C

WHICH TYPE OF MAT. CAN MELT IN THE MAGNALENZ INDUCTION MELTING FURNACES:

VERY SMALL SIZED THINNED & MATERIAL CAN BE MELT OF ANY METAL IN SILICA CRUCILBE OR IN CARBON CRUCILBE WHICH ONE IS SUITABLE.

RECOMMENEDED LINING FOR STEEL MELTING :

*SHOULD HAVE EXCELLENT RESISTANCE TO CHEMICAL, THERMAL AND MECHANICAL DAMAGE, WITH A LOWER SINTERING TEMP. TO SUIT TO STEEL MELTING.  SMALL CAPACITY METAL CAN BE IN SUITABLE  CRUCIBLE

APPROX REQUIRED COMPONENTS IN PERCENTAGE
PRESENT IN LING MAT. FOR. STEEL MELTING IN INDUCTION FURNACE:

 

 

NOT APPLICABLE

FORMER MATERIALS:

NOT APPLICABLE

RECOMMENEDED  CHURING (STIRRING): BASED ON
H/D RATIO IN INDUCTION MLETING FURNACE FOR STEEL MELTING

                                 
                                  NOT APPLICABLE

MODERATE CHURNING/STIRING IS ADVISABLE IN ANY CASE, FOR LOW LOSS OF STEEL, WHILE MELTING IN INDUCTION FURNACE:
   
   
   
   
   
 

Magnalenz Induction Melting Furnaces

Factory/Plant Address
B/4Sakariba Estate, G.I.D.C. Phase - IV,
Vatva, Ahmedabad - 382445 Gujarat (INDIA)
Phone No. :+91-79-25840023 / 25840024
Telefax :+91 - 79 - 25841065

Web Site: http://www.magnalenzindia.com/
E-mail:contact@magnalenz.com
   
   Magnalenz Induction Furnace  ll  Description Of Mf Installations  ll  Melting Crucibles  ll  Mf Solid State Power Converter  ll  Ancillary Equipments  ll  Control Circuits  ll  Safety Margin In Power Semiconductors  ll  Safety And Protection System  ll   Furnace   ll  Aluminum Melting  ll  Induction Melting  Of Brass  ll  nduction Melting  Of Copper  ll  Induction Melting  Of Steel  ll  Very Small Capacity  Induction Melting Furnace  ll  Press Report
   
 
   

 1. Lowest Melting Cost, cause of highest electrical  efficiency so consumes less KWH/TON of melting

 2. Lowest Auxillaries Running Cost, cause of Highest  thermal efficiency so melting cost in totality is reduced

 3. Lowest input KVA required, cause of the best  average power factor of the furnace is 0.98 to 0.99 in  actual running conditions, so better utilization of Power  unit

 4. Reduced fixed cost/ variable cost, cause of  excellent lining life at lowest power consumption, so an  over all better utilizations of productive hours increase  due to less patching & sintering.

 5. Excellent Reliability, cause of structured and  simples design of the furnace reduces the break-down.

 6. Lowest investment cost,

 (A) Cause of Compact furnace design, covers less
       floor  space area compare to others.

 (B) Cause of reasonable furnace price
   
HOME  l  PROFILE  l  PRODUCTS  l  SITEMAP  l  E-MAIL  l  CONTACT
Induction melting furnace, Very small capacity induction melting furnace, Medium capacity furnace, Small capacity furnace, Small capacity melting furnace, Medium melting furnace,