Magnalenz Induction Furnace
 Description Of Mf Installations

 Melting Crucibles
 Mf Solid State Power Converter
 Ancillary Equipments
 Control Circuits
 Safety Margin In Power Semiconductors
 Safety And Protection System
 Furnace

 Aluminum Melting

 Induction Melting  Of Brass

 Induction Melting  Of Copper

 Induction Melting  Of Steel

 Very Small Capacity  Induction Melting Furnace
  Control Circuits
 

The Most Advanced Electronic Components
 
Any ideas that might improve the Performance of an already excellent Furnace technology are applied by Magnalenz. We follow the New Publications and search the most recent electronic components. Our main concern is to reach tomorrow's advanced technological level and submit to our clients only the best.
   
 

Thyristor Controlled Rectifier
  FER melt furnaces rectifier are not just simple diode bridge type but fully thyristor controlled.
 

Advantages
 
  • At low input voltage the Furnaces can deliver power efficiently.
  • Power adjustment can be done over a very large range (5%-100%).
  • Line Voltage Fluctuations cause no damage.
  • The current is limited during any failure or short circuit in the system which prevents bigger technical problems or expenses.
   
   
 

Magnalenz Induction Melting Furnaces

Factory/Plant Address
B/4Sakariba Estate, G.I.D.C. Phase - IV,
Vatva, Ahmedabad - 382445 Gujarat (INDIA)
Phone No. : +91-79-25841065 / 30917163 / 55120554
Telefax :+91 - 79 - 25841065

Web Site: http://www.magnalenzindia.com/
E-mail:contact@magnalenz.com
     
 
   

 1. Lowest Melting Cost, cause of highest electrical  efficiency so consumes less KWH/TON of melting

 2. Lowest Auxillaries Running Cost, cause of Highest  thermal efficiency so melting cost in totality is reduced

 3. Lowest input KVA required, cause of the best  average power factor of the furnace is 0.98 to 0.99 in  actual running conditions, so better utilization of Power  unit

 4. Reduced fixed cost/ variable cost, cause of  excellent lining life at lowest power consumption, so an  over all better utilizations of productive hours increase  due to less patching & sintering.

 5. Excellent Reliability, cause of structured and  simples design of the furnace reduces the break-down.

 6. Lowest investment cost,

 (A) Cause of Compact furnace design, covers less floor        space area compare to others.

 (B) Cause of reasonable furnace price
   
HOME  l  PROFILE  l  PRODUCTS  l  SITEMAP  l  E-MAIL  l  CONTACT